Tungsten nanocoating for transmission oil in a mechanical gearbox.

Detailní popis produktu

Main functions

• High wear protection

            Protects gears, bearings, and other stressed parts of the gearbox, extending its
            service life.

• Friction reduction

            Lower mechanical losses contribute to reduced fuel consumption.

• Reduced operating costs
             Less wear means fewer service interventions and longer maintenance
  intervals.

Effects

• Prevents fatigue of gear surface material and micro erosion
• Protects against extreme pressure
• Absorbs micro-vibrations
• Increases transmission efficiency
• Reduced wear (verified by tests conducted by Brno University of Technology and SGS) extends the service life of the gearbox/differential
• Quieter and smoother gearbox operation
• Treated sliding surfaces become resistant to corrosion
• Can be used in critical damage to large industrial gearboxes, reduces vibration and noise, and extends service intervals

What makes the product unique

• It works on a different physical principle, not on a chemical reaction with oil
• Nanotech does not improve or change the properties of oil. Its effect consists
  in modifying the surfaces of metal friction areas, where it creates a protective film with low friction.
• It is not a chemical additive – there is no risk of corrosion or negative reactions with oil
• The functional component is tungsten nanoparticles, which unfold under pressure and shear stress
• The reduction in friction and wear has been confirmed by independent tests conducted by SGS and Brno University of Technology

Areas of application 

• Passenger cars and sports cars
• Motorcycles
• Trucks, buses, lorries
• Agricultural, construction, and forestry machinery
• Mining machinery
• Quarries

Principle of operation

The functional component of the product is fullerene-type tungsten nanoparticles (round particles). These particles consist of several dozen layers.

During engine operation, pressure and shear stress cause them to unpack and form a continuous, very smooth, and highly resistant protective film with low friction on sliding surfaces.

The resulting nanocoating:

• reduces friction between metal surfaces
• protects sliding surfaces from wear
• contributes to reduced fuel/energy consumption
• extends the service life of the transmission and smoothes its operation

Recommendations for use

• Apply when changing oil
• Not recommended for use in old or contaminated oil

Instructions for use

1. Heat the package (e.g., in warm water) to approx. 50–60 °C
2. Shake thoroughly
3. Pour into the transmission
4. Drive immediately after application
5. The effect is usually noticeable after 100–500 km of operation
6. Nanotech can be mixed with synthetic, semi-synthetic, and mineral oils
7. For large industrial gearboxes, we recommend mixing Nanotech into the oil before
   pouring it into the gearbox

Packaging and dosage

The package volume corresponds to the amount of product in ml in relation to the engine oil capacity.

Example:

For gearboxes with an oil capacity of 2 l → use AG 80 (80 ml), intended for oil capacities up to and including 2 l.

The safety data sheet is available on request

Packing