Tungsten nanoparticle coating for engine oil for MOTORCYCLES

Detailní popis produktu

Main features

High wear protection

- Protects bearings, crankshaft, connecting rods, and other stressed engine parts, extending their service life.

Reduced friction

- Lower mechanical losses contribute to reduced fuel consumption.

Reduced operating costs

- Less wear means fewer service interventions and longer maintenance intervals.

Effects

• Reduced fuel consumption
• Reduced harmful emissions
• Reduced wear (verified by tests conducted by Brno University of Technology and SGS)
• Slight increase in power and torque
• Quieter and smoother engine operation
• Treated sliding surfaces become resistant to corrosion
• Lower friction extends battery life

 What makes the product unique

• It works on a different physical principle, not on a chemical reaction with oil
• Nanotech does not improve or change the properties of engine oil. Its effect consists in modifying the surfaces of metal friction areas, where it creates a protective film with low friction.
• It is not a chemical additive – there is no risk of corrosion or negative reactions with oil
• The functional component is tungsten nanoparticles, which unfold under pressure and shear stress
• The reduction in friction and wear has been confirmed by independent tests conducted
  by SGS and Brno University of technology

Areas of application

• Motorcycle engines, including engines with „wet clutches“
• Sports motorcycles engines

Principle of operation

The functional component of the product is fullerene-type tungsten nanoparticles (round particles). These particles consist of several dozen layers.

During engine operation, pressure and shear stress cause them to unravel and form a continuous, very smooth, and highly resistant protective film with low friction on sliding surfaces.

The resulting nanocoating:

• reduces friction between metal surfaces
• protects sliding surfaces from wear
• contributes to lower fuel and oil consumption
• extends engine life and smoothes its operation

Recommendations for use:

• Aplikujte při výměně oleje
• Nedoporučuje se aplikace do starého nebo kontaminovaného oleje

Instruction for use

1. Heat the can (e.g., in warm water) to approx. 50–60 °C. Do not heat the
   syringe packaging.
2. Shake thoroughly (applies to cans)
3. Pour into the warm engine
4. After application, drive off immediately or let the engine run for a few minutes
5. The effect is usually noticeable after 100–500 km of operation
6. Nanotech is miscible with synthetic, semi-synthetic, and mineral oils

Packaging and dosage

The package volume corresponds to the amount of product in ml in relation to the engine oil capacity.

Example:

For an engine with an oil capacity of 3 l → use MC90 (90 ml), intended for oil capacities up to and including 3 l.

The safety data sheet is available upon request.

Packing

Minimum order quantity: 1 piece